General Repair Tips on Cement Ball Mill

Besides the characteristics of common ball mill--big crushing ratio, easy-to-adopt speed, Hongxing cement mill also has advantages of little investment, simple technological process, small footprint, easy-to-operate and low maintenance workload. Hongxing mill adopts advanced compartment device structure and fine grinding warehouse is equipped with activation device; end of the mill has a special discharging grate to separate grinding media so that achieve the purpose of improving grinding efficiency and yield.

Starting in the ball mill, should check whether the bolt tightening; gears, coupling, etc., as well as the keys to the mine for the first spoon-tight situation. Check the oil tank and reducer, the adequacy of the lubricating device and instrumentation whether illnesses, and pipelines is clear. Mill equipment inspection and grading machine around there impede functioning of the debris, and then the cable car was used to Mill week, the ball could be loose tube and ores, and to inspect the pinion gear meshing with the situation, whether abnormal sound. The start order is first launching the ball mill lubricant pump, when the hydraulic reach 1.5 to 2.0 kg / cm 2, only allowed in ball mill and then start grading machine. And all are in normal operation, can begin to draw mine. In the running process, we should always pay attention to bearing temperature should not exceed 50 ~ 65 C. Attention to the regular motor, voltage, current, temperature, sound, and so on. Attention to the lubrication system at any time, the oil tank should not exceed 35 ~ 40 c, to tubing pressure should be maintained at 1.5 to 2.0 kg / cm 2. jaw crushers:http://www.hx-crusher.com/crusher.html
vibrating screen:http://www.hx-crusher.com/vibrating_screen.html

Maintenance

1.Bearing loading machine full load, so a good lubrication on bearing life have a great relationship, it directly affects the service life of the machine and the running rate, thus requiring into the lubricating oil must be clean, seal must be in good condition, the main oil: rolling bearing; roller bearing; all the gear; the movable bearing, sliding plane.

2. The newly installed tire easily loosened must carry out regular inspection.

3. Pay attention to whether or not the work of machine parts.

4. Pay attention to check the wear parts wear degree, always pay attention to replace the worn parts.

5. Put the device frame plane, should go out dust and dirt to avoid machine doesn’t broken material activities bearing can not on the chassis to move, so that a serious accident.

6. The bearing temperature, stop and check the reason to be eliminated.

7. Rotary gear in the works when there is a huge, shall be immediately stop for inspection, and to eliminate.

As the professional manufacturer of complete sets of mining machinery, such as cone crushers, Henan Hongxing is always doing the best in products and service.

Random Posts


Advertising



Comments are closed.

Advertising

Enter your email address:

Delivered by FeedBurner

Links